How do i change the pull switch in my bathroom? - bathroom pull switch
I have the cord in my bathroom and problems gettting light and give fans change over the same time that only 2 Son by the kernel to 3 with 2 red and a son and a basic cable with a red wire with only 1
Saturday, February 6, 2010
Bathroom Pull Switch How Do I Change The Pull Switch In My Bathroom?
Subscribe to:
Post Comments (Atom)
8 comments:
Do you have the three red son together? It seems that the 2 red son, next to a fan and a light that connects to both the red for the others, they seem to be the best both.
I am in the United States, but may look very different picture than they are. And without a picture or a graphic, the banner each cable will be almost impossible to help someone.
Maybe ask someone where you bought the new switch will help best. Good luck!
Do you have the three red son together? It seems that the 2 red son, next to a fan and a light that connects to both the red for the others, they seem to be the best both.
I am in the United States, but may look very different picture than they are. And without a picture or a graphic, the banner each cable will be almost impossible to help someone.
Maybe ask someone where you bought the new switch will help best. Good luck!
You are an electrician procuring one. Would in any other room, I tell you, but in a steam room must be safe?
Turn off the unit and go buy a new switch, and you can find at any hardware store. easy to change and is usually color-coded cables.
First, to buy a new camera need is about $ 4.00 for a porcelain socket with key ()
Then turn on the light, you must go to the fuse box and turn on the switch in this room when the lights according to your insurance company to do to go that way.
You need a screwdriver and a pair of strippers.
Unscrew the lamp from the ceiling, once down you will see two adjacent son. Turn the unit so that you can take the cable. After the son is out there, take the new device and reconnect the cable, is the black wire to the gold screw on the back of the camera and the white wire to the screw turns white or silver if you have two strings of the same color like, do not panic, you simply connect a wire to each screw is not really an easy thing, but the colors are in the right direction.
Then screw the bracket to the ceiling and replace the lamp and shade, the chain and can now activate the switch again and you're done.
I link below, you'll see also if you want.
Good luck!
You should have seen how old were removed the reference desk,
the cable that you are (red-red T & E) Yes, there are
single red
it would be impossible for us to say how without a glance and evidence that has already gone wrong get in touch, of course,
will take an electrician to about a half hour class you are looking for
Look Good
Was also not have two cells of the T & E in the same direction is the common (C or COM), the other goes to step 1 I do not know where the red. Earth goes to earth
Good luck
See how it apart and put the good part, but only from when the touch-son
This question deserves further details!
You 3CORE double landing with 2 red son!
Gray black red yellow blue and brown only
You are not duplicated and earth red with 2 son!
Red and black, brown and blue only
Please explain more!
What colors are the 3 wires?
Do red handle?
What the other is a single cable and the earth, or even a single cable?
What color is it?
And just to prove me wrong with the guy, even before 1977 drivers red Arent 15th Reprint And here the evidence is
http://en.wikipedia.org/wiki/Electrical_ ...
Post a Comment